Lubrisint Line

Lubricating fluids with synthetic, semi-synthetic and food grade bases with additives for special lubrication. Suitable for hydraulic systems, compressors, gearboxes, chains, etc. Products with applications also suitable for machining, grinding, stamping, wire drawing and wire electro erosion.

Lubrisint Neutroil / Neutroil C / Neutroil G

Food grade fluid with mineral USP and synthetic oil, used in hydraulics, guides, buses and gears and gearboxes (Line G), compressors (Line C), which requires anti wear and EP characteristics, supporting both high and extremely low temperatures. Produced with viscosities of 10 cSt at 40 ° C up to 680 cSt at 40 ° C.

Lubrisint LB

Food grade synthetic lubricant used in reducers, guides, buses, gears, belts, transmission chains and torque in textile, dyeing, pharmaceutical and food industries. Produced with viscosities from 10 cSt at 40 ° C up to 680 cSt at 40 ° C.

Lubrisint HS

Food grade synthetic fluid, used in hydraulics, reducers, air compressors and cooling, which requires anti wear characteristics, EP and high capability to separate from water.

Application: Also suitable for bearings, bushings and sliding, etc. Produced with viscosities from 10 cSt at 40 ° C up to 680 cSt at 40 ° C.

Lubrisint HCR

Food-grade synthetic fluid, suitable for use in air compressors, generally refrigeration compressors, ammonia compressors, where a resistant lubricant at low temperatures is needed, which possesses anti wear characteristics, EP and excellent separation from water. They are produced with viscosity from 10 cSt to 680 cSt at 40 ° C to 40 ° C.

Lubrisint CTF

Liquid lubricants with excellent adherence power, no spills, lubricates during highest demands and penetrates smallest of holes; form a lubricant film that supports working temperatures ranging from -40 ° C to 250 ° C.

For each requirement, available in several viscosities (from 10 cSt to 680 cSt).

Application: Product used in chains, cables and conveyors in the Food Industry, Pharmaceutical, Textiles, Construction Materials, Ceramics and Paper Industries, in harsh environments such as humid, acid, alkali, subject to steam and dust.

Lubrisint F-3

Soluble synthetic fluid for machining of ferrous and nonferrous metals in central machining or mechanical and automatic lathes.

For general machining, using a 5% water solution.

Lubrisint F-2

Soluble synthetic fluid used in grinding operations. Once it is translucent, it allows viewing part in operation. It is used in 2% water solution.

Lubrisint F-13

Soluble synthetic fluid for grinding operations. It is used in 2% water solution.

Lubrisint Fluid FRC/B

Soluble semi-synthetic fluid for machining of ferrous and nonferrous metals in mechanical and automatic lathes. It possesses anti wear and extreme pressure additives.

For general machining, using a 5% water solution.

For uses with saws, solution is 5% to 10% water.

Lubrisint Stamp 1

Washable synthetic fluid for stamping of ferrous and non-ferrous metals. Used in cutting operations and light drawing. Once it is washable, it eases degreasing operations. Should be used non-diluted to preserve the tool.

Lubrisint Stamp 2

Synthetic fluid for stamping and drawing of ferrous and nonferrous metals in parts of large and deep drawing operations. Once it is washable, it eases degreasing operations. Should be used non-diluted to preserve the tool; does not scratch the drawn parts.

Lubrisint 51/H

Evaporative synthetic fluid, used in lamination and stamping of ferrous and nonferrous metals. Once it evaporates, it cleans the equipment, representing economy and speed at work.

Lubrisint Penetrate

General use degreaser, aids degreasing bolts and nuts, even if oxidized. Must be applied directly over the piece / part / equipment. After a few moments, release the part with mechanical force.

Need a Lubrification Solution?

Contact Us